The Artist's Life

1st Aero Squadron and the Punative Expedition - taking another crack at it


On March 9, 1916, more than 1,000 Mexican horsemen under the leadership of Pancho Villa crossed the border and raided the town of Columbus, New Mexico. 17 Americans were killed as they looted and burned the town. In response, President Woodrow Wilson asked permission from President Carranza of Mexico to send troops into Mexico. Carranza reluctantly agreed under the stipulation that the expedition would be “for the sole purpose of capturing the bandit Villa.” Wilson ordered a “Punitive Expedition,” and assigned General John J. “Blackjack” Pershing to pursue Villa’s forces. Pershing thought this would be a good opportunity to demonstrate the effectiveness of the airplane in military operations, and ordered the 1st Aero Squadron under the command of Capt. Benjamin D. Foulois to Columbus to join the expedition. Pershing’s plan was to use the aircraft for observation support of the ground forces. The squadron’s deployment would represent the first use of a US aviation unit in military action, and the squadron’s simple marking - a red star painted on the airplanes’ rudder - was the first use of a national insignia on a US aircraft

 

Officially commissioned in 1913, the 1st Aero Squadron arrived in Columbus on March 15, only with 8 Curtiss JN-3, 11 pilots, 82 enlisted men, and flew their first reconnaissance sortie on the 16th. This marked the first time American aircraft were used in an actual military operation.

 

3 days later, on March 19th, the squadron was ordered to report ‘without delay’ to Pershing’s headquarters in Casas Grandes, Mexico. The pilots departed late in the afternoon, but having little night flying experience, the darkness proved to be a major problem for the pilots. One airplane made it to headquarters that night. The next morning 2 aircraft landed. One airplane had returned to Columbus, and 2 others were missing.

 

Throughout the expedition problems continued to plague the aircraft of the 1st Aero Squadron, and by April 14, only two of the airplanes were in a flyable condition. The 1st Aero Squadron had done all they could with the equipment they had. The bad news reached Washington and Secretary Baker asked Congress for a $500,000 appropriation to purchase 12 new Curtiss R-2 airplanes, equipped with Lewis guns, automatic cameras, bombs, and radios. On April 20, the 1st Aero Squadron was ordered back to Columbus. When they arrived Captain Foulois determined the 2 remaining Jennies were in such bad condition that he set them on fire to make sure no one could order him to fly them again.

 

The first attempt by a US military air unit could be considered a failure, but in the bigger picture it was actually a learning experience. Although they were unsuccessful in finding Pancho Villa, Captain Foulois considered this a turning point in the development of American military aviation. 

 

The numbers supported his opinion. During the first US military air action, the 1st Aero Squadron flew 346 hours on 540 flights and covered more than 19,300 miles, performing aerial reconnaissance and photography, and transporting mail and official dispatches. More importantly, despite the failures of the 1st Aero Squadron, the military learned that the airplane could no longer be considered an experiment or an oddity, but could become a useful military tool.

In 2015 I created a paitning entitled Fledgling Air Force which depicted the 1st Aero Squadron JN3s in action. Unfortunately my reference resources on the subject at that time were very limited and I had to create most of the scene from my imagination. To be honest, I wasn't completely satisfied with the end result. It just didn't seem to fulfill the vision I had in my head.

In the years since since I've not only been able to collect correct lighting references for the aircraft, but I've also gather more historical references and even gone so far as to visit Columbus, NM and stand on the ground where the airfield was located at the correct time of day. I've already got what I think is a much better composition worked out.
 

 

After deciding to re-work the subject painting, I began surfing through 1st AS photo references. Among my references are period photos taken in 1916 as well as my own photos of Columbus, NM and the airfield location which I took 18 months ago. 


I came across one period photo which caught my eye. From the angle I guessed that it was taken late in the afternoon, somewhere near the east side of 1st AS airfield looking west towards town. I checked to see if I had a similar photo of my own, and BANG - not only did I have a similar shot, I had almost the exact same shot, only 102 years later!

Pure coincidence, completely serendipity.

 


 

With my new composition in mind I know not only my painting size, but also the size of each aircraft as it will appear in the painting. Regardless of whether its an aircraft, a stagecoach, a horse, or any other subject, my goal is to simulate the sight-size method of drawing where the subject is represented on the canvas at the same size as the actual object as it is viewed. In other words, it should give the illusion that you are looking through the picture plane at the actual object beyond. 


In order to achieve this effect I have to know the scale of my subject and how its appearance would be altered by linear perspective. My main aircraft in the painting will be 22 inches wide, so after a little number crunching I find that the viewer would need to be standing 61 feet and 7 inches back from the tip of the aircraft’s nose in order for it to appear 22 inches wide in their field of vision. For mechanical subjects such as aircraft, an accurate 3-view drawing is essential. I place those drawings in Adobe Illustrator and measure out the X/Y key coordinates of key points on the aircraft (top). I then map those coordinates out on a large sheet of paper (bottom), and voilà! I have an accurate 3 dimensional rendering of my subject at the appropriate viewing distance.

 

 

Once the perspective drawing for the main JN3 was finished I began piecing the composition together in Photoshop. I’ve set up my composition using classical golden mean measurements will place my most important elements in the natural focal points of the image. I established my eye level in the painting at 4’, which means that everything that is 4 feet off the ground will theoretically fall on the horizon.

 

 

The pilots and the dog are both recycled elements from the previous version, the man hand propping the airplane is a new element. On early aircraft that lacked electrical systems it was necessary to hand prop the aircraft in order to get the engine started. For the person pulling the prop this could be a very strenuous job which required a full-body pull and twist in order to set the propeller in motion. The twisting, dynamic motion of hand propping an airplane has always reminded me of one of my favorite works of art, “David” by Gianlorenzo Bernini, and I wanted to try and capture that springlike tension with my prop guy. My reference model for the figure was a slightly larger guy, so I had to improvise and slim him up a bit for the painting.

 

 



 

 



Comments


Leave a Comment

Remember Your Info
Check this box if you want email updates when people comment on this post